You play a role in work zone safety. Work with us.” That’s the theme of this year’s National Work Zone Awareness Week, set for April 17-21.
In 2020, 117 workers died in work zones, according to the campaign’s website.
“Work zones need traffic controls identified by signs, cones, barrels and barriers,” OSHA says. “Drivers, workers on foot, and pedestrians must be able to see and understand the proper routes. Construction project managers determine traffic control plans within construction/demolition worksites.”
Keep your work zones safe by following these tips from OSHA:
- Use traffic control devices, signals and message boards to instruct drivers to follow established paths away from where work is being done.
- Deter unauthorized entry into work zones by using concrete, water, sand, collapsible barriers and other impact-absorbing materials.
- Make sure flaggers are wearing high-visibility clothing with a fluorescent background and made of retroreflective material. This makes them visible from at least 1,000 feet. They also should be using “STOP/SLOW” paddles or paddles with lights, and be trained on authorized signaling methods.
- Ensure work zones are well lit. “Lighting for workers on foot and for equipment operators should be at least 5 foot-candles or greater. Where available lighting is not sufficient, flares or chemical lighting should be used. Glare should be controlled or eliminated.”
- Buckle up. “Seat belts and rollover protection should be used on equipment and vehicles as the manufacturer recommends